Wood Tech-The process

The tools I used:

Steel rule

Tri-square

Mallet

Marking gauge

Wood chisel

Claw hammer

Backed saw

Bench hook

Step 1. I used a paper, pencil and a ruler to make a full size working of my box, so I know that it is possible to create.

Step 2. I used: a ruler, tri-square and a pencil to copy the measurements from my drawing onto the wood.

Step 3. I marked a square line(at 90 degrees) across and vertically using a marking gauge

Step 4. I cut off the first piece of wood using a backed saw and a bench hook.

Step 5. I then marked out the joint on the wood using a marking gauge

Step 6. I then used a backed saw to cut out the line used by a marking gauge.

Step 7. The next thing I did was I used a sharp wood chisel and a mallet to cut out the remaining wood pieces to create the joint.

Step 8. Next thing I did was I added my 140cm piece of wood to my joint and glue it altogether and let it sit for an half an hour.

Technology (wood)

I have chosen to make a box to put in jewelry. I think this is the best choice because it can be useful to put anything in it. It will be used for stuff like to put money in or for other stuff. For this project I will have to consider that it will keep my money away from my little sibling.